Veřejné osvětlení na solární “pohon” do Taškentu. Zájemci o kontrakt?

OSCE Project Co-ordinator in Uzbekistan run a call for tenders for the Supply and Installation of street lighting system powered by solar energy. Deadline 14/11.

Deset Octavií do Kosova. Kdo je schopen dát nejnižší cenu?

Mise OSCE (Organizace pro bezpečnost a spolupráci v Evropě) v Kosovu vyhlašuje tendr na 10 Octavií a jednoho Kodiaqa. Deadline 27/11.

OSCE potřebuje vylepšit web www.zlostorstvaodomraza.mk. Kdo to dokáže?

Mise OSCE (Organizace pro bezpečnost a spolupráci v Evropě) v Makedonském Skopje vyhlašuje tendr na “předělávku/vylepšení” webu www.zlostorstvaodomraza.mk. Deadline 13/11.

Předmediální služby, služby tisku a multikanálové služby pro Publikační úřad EU. Při prvním vyhlášení se nikdo nepoříhlásil

Zakázka: Předmediální služby, služby tisku a multikanálové služby

Zadavatel: Úřad pro publikace Evropské unie, 2, rue Mercier, Luxembourg

Místo práce/dodání: prostory dodavatele s dodáním do Noyelles-sous-Lens (FR) a Lucemburku. Mohou být požadovány i dodávky do Bruselu a na další místa, zejména v rámci Evropské unie.

To pass the selection phase, the following conditions must be fulfilled:

 The tenderer’s economic activity is relevant to the scope of the FWC.

 There are at least 12 operational staff (excluding managerial and administrative staff) at the contractor’s main site.

 The Publications Office has accepted at least three PRFs for premedia and three for printing services. They altogether fulfil all requirements set out in point 2.6.2.1 above.

 In case of subcontracting exceeding 20 % per subcontractor, at least one PRF for the subcontractor must be accepted, showing the subcontractor’s experience in the tasks to be entrusted to him.

 All certificates are valid on the date of submission.

 The quality certificates or the other evidence of quality measures in place cover the whole production chain, both for premedia and printing. The certificates are provided for the consortium leaders and consortium members, as well as for subcontractors over 20 %, to the extent that they are proposed to participate in the production.

 As a minimum, the environmental certificates or other evidence of environmental measures in place cover the following areas: o Disposal of dangerous waste for printing. o Treatment of traditional waste.

The certificates are provided for the consortium leaders and consortium members, as well as for subcontractors over 20 %.

 The description of the machine park for the performance of the printing and finishing work is detailed and includes the number of machines, models, capacities and year of production.

 The tenderer, including its subcontractors where applicable, has the capacity to produce 640 000 A4 colour pages per 8-hour day.

 The tenderer has the capacity to apply lamination and spot-varnish finishing.

 The proposed paper qualities for generic and brand-equivalents – including their presentations in the catalogue – are complete, accurate and of sufficient quality. All papers proposed by the tenderer are of an archival quality compliant with DIN ISO 9706 or DIN 6738, and are at least elemental chlorine free (ECF) and certified FSC or PEFC. Recycled papers are processed chlorine free (PCF) and certified FSC recycled. The manufacturers of the paper are credited EMAS or ISO 14001.

 The hardware and software for prepress and premedia work is relevant and not outdated.

 The tenderer has the capacity to: o Manipulate at minimum Adobe Creative Cloud 2015.4 InDesign files (to be vjoon K4® compatible, see points 4.3.1.5 and 4.6.1). o Manipulate at minimum Adobe Creative Cloud 2017 Illustrator files. o Manipulate at minimum Adobe Creative Cloud 2017 Photoshop files. o Manipulate at minimum Microsoft Office 2010 Word files. o Manipulate at minimum Microsoft Office 2010 Excel files. o Send and receive files via a secure FTP server.

Kontrakt na 40 měsíců / budget €6.000.000

Deadline 15/12

IT služby pro evropský Open Data Portal

Tendr: Provision of IT services related to Open Data Portal (ODP)

Zadavatel: Publication Office of the EU

Rámcový kontrakt na 4 roky /budget €3.000.000

Scope of the call for tenders: the provision of software evolution, maintenance and consultancy services for the ODP. During the implementation of the FWC, the migration of the application to a cloud environment is foreseen.

Background: The European Union Open Data Portal is the single point of access to a growing range of data from the institutions and other bodies of the European Union. Data are free to use and reuse for commercial or non-commercial purposes. By providing easy and free access to data, the portal aims to promote their innovative use and unleash their economic potential. It also aims to help foster the transparency and the accountability of the institutions and other bodies of the EU.

Services to be provided:

S1                             Evolution

S2                             Maintenance

S3                             Consultancy

Other related services that may be requested:

S4                             Takeover

S5                             Handover

Deadline k podání nabídek 15/12

Evropský patentový úřad hledá partnera pro “externalizaci” datových středisek

Tendr: Zajištění řízení projektu a technické odbornosti pro externalizaci datových středisek

Zadavatel: Evropský patentový úřad

Kontrakt na 2 roky

Místo „doručení“: sídlo EPO v The Hague/Rijswijku

Kritéria pro hodnocení: technická část/kvalita 60% : cena 40%

Tendr má 2 fáze:

1) do 17/11 12:00 je třeba vyplnit a odeslat Pre-Selection Questions a Confidentiality Agreement (viz dále)

2) Zhruba na konci listopadu dostanou vybraní zájemci zadávací dokumentaci. Deadline pro odevzdání nabídky je plánovaná na polovinu/konec prosince.

NDA ke stažení.

Pre-Selection Questions:

I. Economic and Financial Capacity of the bidder

  1. Please confirm that the statutory seat of your company (legal entity) is in a Contracting State to the European Patent Convention, as specified in Point 1 of this Published Notice. Please provide evidence.
  2. Please confirm that your company is not bankrupt or being wound up, has ceased or suspended business activities, is being administered by courts or has entered into arrangements with creditors or analogous situations.
  3. Please confirm that the EPO may run a solvency check on your company via an external source (i.e. Dun & Bradstreet).
  4. Please supply details and the name(s) of the representative(s) authorised to sign a Non-Disclosure Agreement on behalf of your company, together with a recent excerpt from the commercial or similar register for your company (where so needed supplemented by additional information). In case the register does not specify this concretely, please arrange for a power of attorney.

II. Technical and Professional Capacity of the bidder:

  1. Please confirm and provide evidence that your company has at least 5 years’ experience in providing Project Management Support for Data Centre Migration project to organisations in Europe of a similar size as the EPO
  2. Please provide a minimum of 3 references/ written customer testimonials from previous customers to whom the bidder has provided the above services across multiple locations within at least Europe. The following Structure should be used:
  • General info: Organisation name/ Country locations/ Business sector/ Agreement to a reference visit (for at least 1 reference);
  • Details: Service descriptions and main technical details of the service solution/ Scale of implementation (number of users & locations, complexity of migrated services & applications)/ Service period

Evropský patentový úřad koupí platformu pro správu identit a přístupů

Zakázka: Poskytnutí, návrh, konfigurace, realizace a provoz platformy pro správu identit a přístupů jako řízené služby

Zadavatel: The European Patent Organisation (EPO), Munich, Germany

Místa realizace: Mnichov a Rijswijk

Popis zakázky:

(a) Purpose of the contract:

The provision, design, configuration, implementation and operation of an Identity and Access Management (IAM) platform as a managed service for the EPO.

The platform consists of 3 components:

  1. Identity Governance and Administration module: This module will constitute the corporate directory for all EPO electronic identities (employees, partners and customers). It will be connected to EPO identity sources and target systems for user provisioning.
  2. Authentication module: This module will act as a centralised authentication engine for the majority of EPO systems. It will support various authentication methods and federation scenarios, acting as an identity provider.
  3. Authentication Token Management module: This module will be employed by EPO users to manage the lifecycle (request, reset, disable, etc.) of their authentication tokens (passwords, smartcards), etc.

The IAM platform shall manage all provisioning and authentication activities for EPO users (approximately: 9 000 employees, 20 000 customers and 6 000 partners). EPO already supports identity federation with external partners, single sign on and multifactor authentication. All these functionalities, now managed by different systems, shall be integrated in the IAM Platform.

Economic and Financial Capacity of the bidder

  1. Confirm that the statutory seat of your company (legal entity) is in a Contracting State to the European Patent Convention, as specified in Point 1 of this Published Notice. Please provide evidence.
  2. Does your company have an annual turnover of approximately 6 000 000 EUR or more. Please provide evidence.
  3. Confirm that your company is not bankrupt or being wound up, has ceased or suspended business activities, is being administered by courts or has entered into arrangements with creditors or analogous situations.
  4. Confirm that the EPO may run a solvency check on your company via an external source (i.e. Dun & Bradstreet).

Technical and Professional Capacity of the bidder:

  1. Provide at least 2 references for comparable projects, in terms of scope and volume, in the area of Identity and Access Management as described under point 3a of this Published Notice. These projects must have been undertaken in the last 3 years.
  2. Confirm and provide evidence that your company has sufficient staff with experience and knowledge in the area of Identity and Access Management to cope with the requested work as described under point 3a of this Published Notice. Please provide 3 CVs of potential candidates you might use for this work.

Bidders might be invited for a bid presentation to take place in Rijswijk in case technical clarifications are needed. The date, place and time will be communicated in due time. Respective costs incurred by the bidders relating to such a presentation will not be reimbursed.

Harmonogram:

Do 17/11 – odeslání Confidentiality Agreement

20/11 – rozeslání zadávací dokumentace

Deadline pro odeslání nabídek je plánován na 5/1/2018

Skills training and practical exercises in the areas of leadership, intercultural relations, change management, organisational behavior for NATO staff

NATO Executive Development Programme: The purpose of this Request For Proposal (RFP) is to award a contract to an academic partner to design, deliver and manage NATO’s Executive Development Programme (NEDP) in collaboration with the Talent Management & Organisational Development Service (TMOD). The NEDP includes tailored reading and instruction, interactive learning assignments, case studies, exercises and group interaction over a ten-month period. It will provide skills training and practical exercises in the areas of leadership, intercultural relations, change management, organisational behavior (among others) and will prepare NATO staff to collaborate more closely while understanding and working with differences.
Deadline 24/11

Servery pro Interpol. Místo doručení: Lyon a Singapur

Zakázka: Supply, delivery and maintenance of computer equipment

Zadavatel: Interpol, Lyon – Francie

Rámcová smlouva na 5 let

Dva samostatné/na sobě nezávislé  loty: LOT1 dodávka serverů do Francie, LOT2 dodávka serverů do Singapuru

LOT1 – technický popis – 3 typy serverů:

1) This PowerEdge R630 server, will be considered as « Medium CPU Computing Capacity ».  It will be composed of:  2 CPU Sockets : Intel Xeon E5-2620 v4  64 GB of RAM  2 disks: 300GB SAS 10K (approximately 300GB) o Hardware RAID 1  4 disks: 1TB SATA (approx. 1TB) o Hardware RAID 5  Minimum of 2 network ports 1Gbit/sec  Redundant Power Supplies  iDRAC Enterprise controller

2) This PowerEdge R630 server, will be considered as « High CPU Computing Capacity ».  It will be composed of:  2 CPU Sockets : Intel Xeon E5-2695 v4  256 GB of RAM  2 disks: 300GB SAS 10K (approximately 300GB) o Hardware RAID 1  3 disks: 1TB SSD (approximately 1TB) o Hardware RAID 5  Minimum of 2 network ports 1Gbit/sec  Minimum of 2 network ports 10Gbit/sec  o With SFP+ for each port  Redundant Power Supplies  iDRAC Enterprise controller

 3) This PowerEdge C4130 server, will be considered as « High GPU parallel Computing Capacity ».  It will be composed of:  2 CPU Sockets : Intel Xeon E5-2680 v4  256 GB of RAM  2 disks : 1TB SSD (approximately 1TB) o Hardware RAID 1  4 NVIDIA P40 GPU (24GB of RAM)  Chassis type B  Minimum of 2 network ports 1Gbit/sec  Possible Infiniband or other clustering high speed network connectivity (may be added after the purchase)  Redundant Power Supplies (guarantee for maximum server charge)  iDRAC Enterprise controller

LOT2 – technický popis – 3 typy serverů:

1) This PowerEdge R630 server, will be considered as « Medium CPU Computing Capacity ».  It will be composed of:  2 CPU Sockets : Intel Xeon E5-2620 v4  64 GB of RAM  2 disks: 300GB SAS 10K (approximately 300GB) o Hardware RAID 1  4 disks: 1TB SATA (environ 1TB) o Hardware RAID 5  Minimum of 2 network ports 1Gbit/sec  Redundant Power Supplies  iDRAC Enterprise controller

2) This PowerEdge R630 server, will be considered as « High CPU Computing Capacity ».  It will be composed of:  2 CPU Sockets : Intel Xeon E5-2695 v4  256 GB of RAM  2 disks: 300GB SAS 10K (approximately 300GB) o Hardware RAID 1  3 disks: 1TB SSD (approximately 1TB) o Hardware RAID 5  Minimum of 2 network ports 1Gbit/sec  Minimum of 2 network ports 10Gbit/sec  o With SFP+ for each port  Redundant Power Supplies  iDRAC Enterprise controller

3) This PowerEdge C4130 server, will be considered as « High GPU parallel Computing Capacity ».  It will be composed of:  2 CPU Sockets : Intel Xeon E5-2680 v4  256 GB of RAM  2 disks : 1TB SSD (approximately 1TB) o Hardware RAID 1  4 NVIDIA P40 GPU (24GB of RAM each)  Chassis type B  Minimum of 2 network ports 1Gbit/sec  Possible Infiniband or other clustering high speed network connectivity (may be added after the purchase)  Redundant Power Supplies (guarantee for maximum server charge)  iDRAC Enterprise controller

Deadline: 24/11 – 17:00

Software platform for facility, inventory, asset and event management for the EDA agency

Zakázka: Software platform for facility, inventory, asset and event management

Zadavatel: The European Defence Agency (EDA), Brussels

Kontrakt na 4 roky / budget €134.800

The sought software platform (‘the Platform’) will be used by EDA to manage in particular its facilities, inventory, assets and events. In addition, the platform can be considered and used also for other purposes depending on its design and functionality and according to the evolving needs of the EDA.

The services to be provided under the contract shall include at least the following tasks:

  1. Provision of the Platform as a service (SaaS/PaaS). It can be hosted either directly by the Tenderer or in a commercial cloud environment.
  1. Consultancy services allowing the configuration of the Platform in accordance with EDA needs and business processes and its actual implementation within EDA including the transformation of relevant business processes and education and training of end users.

EDA is looking for software delivering the required functionality ‘out-of-the-box’ or via supported and documented configuration activities which can be performed by advanced users or IT staff of the Agency, without customisation of the Platform, without development of additional software components by the tenderer and without extensive consultancy support by the tenderer.

Solutions failing to meet this requirement will be excluded from the competition. The following definitions clarify what functionality is EDA looking for:

Facilities: Parts of the premises or specific installations on the premises designed for a certain purpose, such as offices, meeting rooms, parking places, HVAC, technical rooms, lifts, etc.

Location: Is a physically existing place (room, office, entrance hall, garage, garden, lift, etc.) where items may be physically located.

Facility management: Is a process designed to take stock of all the facilities available on the premises, their parameters such as location, dimensions, capacity or status and their actual usage and of the installed equipment.

Inventoried Item: A tangible or intangible item which is subject to registration and tracing in terms of its location and usage by the organisation during its lifecycle.

Inventory management: Is a process designed to register items upon their arrival to EDA and trace their location and actual usage during their lifecycle.

Asset: Is an inventoried item the financial value of which exceeds a specified threshold.

Asset management: Is a process designed to provide compliance with the EU financial regulations with regards to financial accounting of assets owned by the EDA.

Event: Is a meeting, visit, technical or service intervention organised or initiated by EDA, involving EDA staff and people external to EDA, such as meeting participants, visitors (both including VIPs), job candidates, consulants, technicians. Events can occur both inside and outside EDA premises.

Event management: Is a process designed to keep control of all the events in EDA scope and of all the people, equipment and services involved in an event, facilitate the organisation of events and keep records of all organised events.

Consultancy will be required for assistance in the following areas:

  • Requirements gathering
  • Configuration of the Software
  • Data migration, export/import
  • Coaching of EDA advanced users and/or IT staff in the configuration of the Software
  • Adjustment of business processes within EDA in order to match the philosophy of the Software
  • End user assistance and training

Project management activities may be required in order to facilitate the process of requirements gathering, software configuration and adjustment of EDA business processes.

Projevení zájmu – deadline: 6/11 – 17.00